View LM1-PPP1-01-N1_1265007.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Cree(R) SMD LED
Model # LM-PPP-0-N Data Sheet
120-degree, 3.2 x 2.8-mm, SMT LED in full color with water-transparent lens
Applications
* * * * Indoor and Outdoor Displays Backlighting Coupling into Light Guides RGB Full-Color Displays
Absolute Maximum Ratings (TA = 25C)
Absolute Maximum Rating R 50 200 5 125 G 25 100 5 100 -40 ~ +100 -40 ~ +100 +110 450 650 300 450 110 400 580 280 430 110 450 680 300 480 B 25 100 5 100
Items Forward Current
Note 1
Symbol IF
Note 2
Unit mA mA V mW C C C C/W C/W C/W C/W
Peak Forward Current Reverse Voltage Power Dissipation
IFP VR PD Topr Tstg TJ
Note 3
Operation Temperature Storage Temperature Junction Temperature Junction/ambient 1 chip on
RTHJA RTHJA RTHJS RTHJS
Junction/ambient 3 chips on
Note 3
Junction/solder point 1 chip on Junction/solder point 3 chips on
Notes:
1. 2. 3.
Single-color light. Pulse width <=0.1 msec, duty <=1/10. RTH test condition: mounted on PC Board FR 4 (pad size >=16mm2)
Typical Electrical & Optical Characteristics (TA = 25C)
Characteristics Condition IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA VR = 5 V Symbol PEAK DOM 21/2 VF(avg) VF(max) IV(min) IV(avg) IR Values R 620 612~622 24 120 2.0 2.5 180 300 10 G 520 520~540 38 120 3.4 4.0 280 450 10 B 465 460~480 28 120 3.4 4.0 71 110 10 Unit nm nm nm deg V V mcd mcd A
D-CT149.000 Data Sheet: CL
Wavelength at peak emission Dominant Wavelength Spectral bandwidth at 50% IREL max Viewing Angle at 50% IV Forward Voltage
Luminous Intensity Reverse Current (max)
Subject to change without notice. www.cree.com/ledlamps
Standard Bins for LM-PPP-0-N (IF = 20 mA)
Lamps are sorted to luminous intensity (IV) and dominant wavelength (D) bins shown. Orders for LM1-PPP1-01-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (D) values shown and specified are at IF = 20 mA. Luminous Intensity (IV)
450 mcd 280 mcd
U or above T S
180 mcd 612 nm Dominant Wavelength (D) 622 nm
Luminous Intensity (IV)
710 mcd 450 mcd
V or above U T
280 mcd 520 nm Dominant Wavelength (D) 540 nm
Luminous Intensity (IV)
180 mcd 112 mcd
S or above R Q
71 mcd 460 nm Dominant Wavelength (D) 480 nm
Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is 10%. 3. Tolerance of measurement of the dominant wavelength is 1 nm. 4. Tolerance of measurement of VF is 0.05 V. 5. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 6. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 7. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT49.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Graphs
Document No. Rev. No.
SPE/LM1-PPP1-01-N1 02
Graphs
100%
BLUE 80%
GREEN
RED
60%
40%
20%
0% 350 400 450 500 550 600 650 700 Wd(nm)
RELATIVE INTENSITY VS, DOMINANT WAVE LENGTH If (mA) 100.0 80.0 60.0 40.0 BLUE Vf(V) 3.4 3.8 4.2 4.6 5.0 20.0 0.0 1.8
100.0 80.0 60.0 40.0 20.0
If (mA)
GREEN
RED Vf(V) 2.0 2.2 2.4 2.6 2.8
0.0 3.0
FORWARD CURRENT VS. FORWARD VOLTAGE.
FORWARD CURRENT VS. FORWARD VOLTAGE.
5.0 4.0 3.0 2.0 1.0 0.0 0.0 GREEN If(mA) 20.0 40.0 60.0 80.0 100.0 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT.
5.0 4.0 RED 3.0 2.0 1.0 0.0 0.0 BLUE If(mA) 20.0 40.0 60.0 80.0 100.0
RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
CLD-CT49.000
4/6
Format #:
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps COTCO-D-074 REV.4
Graphs
Graphs
50% Power Angle : 0
Document No. Rev. No.
SPE/LM1-PPP1-01-N1 02
100%
80%
60%
40%
20%
-90
-60
-30
0
30
60
90
0%
FAR FIELD PATTERN
70 60 50 40 30 20 10 0
IF(mA)
70 60 RED 50 40 30 20 BLUE 10 T( C) 0
IF(mA)
RED
GREEN
GREEN
BLUE T( C) 0 20 40 60 80 100
0
20
40
60
80
100
70 60 50 40 30 20 10 0
IF(mA)
70 60 RED 50 40 30 20 BLUE T( C) 10 0
IF(mA)
RED
GREEN
GREEN
BLUE T( C) 0 20 40 60 80 100
0
20
40
60
80
100
5/6
Format #: COTCO-D-074
REV.4
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
4
CLD-CT49.000
Document No. Rev. No.
SPE/LM1-PPP1-01-N1 02
Graphs
CIE 9 Graph
the color coordinates of the mixed light can be expected within the area of the color triangle marked a). The color coordinates of the mixed light can be expected within the area of the color triangle marked "a)". the achromatic point (x=0.33,y=0.33) is marked"+" The achromatic point (x=0.33,y=0.33) is marked "+".
Items Prepared by Checked by Approved by FCN#
Signatures
Meiliping XieJH DavidLiu
Date
2005-07-06 2005-07-06 2005-07-06 Rev.No 02 Date
Revision History
Change Description
2005-07-06 Release.
FCN20050192
Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
6/6
Format #: COTCO-D-074
REV.4
5
CLD-CT49.000
isplays
Document No. Rev. No. Mechanical Dimensions Dimension Draw ing
SPE/LM1-PPP1-01-N1 02
All dimensions are in mm.
ides ys ngs at Ta = 25C
Symbol IF IFP VR PD Topr Tstg Tj
3 3
Absolute maximum Rating R G B 50 200 5 125 25 100 5 100 -40~+100 -40~+100 +110 450 650 300 450 +110 400 580 280 430 +110 450 680 300 480 25 100 5 100
Unit mA mA V mW C C C C/W C/W C/W C/W
Rth JA Rth JA Rth JS Rth JS
n n
idth <=0.1msec duty <=1/10 *3 Rth test condition: Mounted on PC Board FR 4(pad size>=16mm2)
c ) ical Characteristics ( Ta = 25C)
Values R 620 612~622 24 G 520 520~540 38 B 465 460~480 28
Condition
Symbol
Unit
n
IF=20mA IF=20mA Notes
peak
nm nm nm
dom
rel max
IF=20mA RoHS Compliance
120 120 120 Deg. I =20mA 21/2 The Flevels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU DirecVF(avg) 2.0 3.4 3.4 V tive F2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment I =20mA (RoHS), as amended through April 21, 2006. 4.0 V 2.5 4.0 V
F(max)
Iv(Min) 180 280 71 mcd Vision Advisory Claim IF=20mA Iv(Avg) 300 110 mcd Users should be cautioned not to stare at the 450 of this LED product. The bright light can damage the eye. light VR=5V IR 10 10 10
A
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
CLD-CT49.000
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Standard/Custom
0: Standard C: Custom
VF
0: Full forward voltage distribution 1~9, A~Z . . . : special request *
Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV
1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request *
Packing type Product P/N
0: Standard = tape pack 1~9, A~Z . . . : special request *
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number Contact Cree Sales Description SMD 120 Full Color, Tape & Reel
* Please contact your Cree representative about the availability of non-standard kits.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
CLD-CT49.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps

▲Up To Search▲

Price & Availability of LM1-PPP1-01-N1

	To Download LM1-PPP1-01-N1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .